Enclosure Combo
How Do Convert An Internal Dvd Drive To External Device
Converting an internal DVD drive to an external device is a relatively simple task for anyone who has a familiarity with basic hand tools.
This project allows a user to add another drive to a small or fully optioned-out computer with no expansion bays remaining or for a desktop CPU that is located under a desk, where opening and closing the drive can be impractical.
This task should take roughly 15 minutes to complete.take” Dell Inspiron 600m CDRW-DVD Combo ” for example:
1、Disassemble the external dvd drive enclosure by removing the screws per the manufacturer’s instructions. (Please note: This step will vary by manufacturer, make and model, but usually requires the removal of four screws from the bottom of the unit.)
2、Lift off the top cover.
3、Attach any mounting brackets to the side of the drive using the retention screws provided. (Please note: Disregard this step if no mounting brackets are required. This is a manufacturer-dependent step and may not apply to your enclosure.)
4、Lower the cable end of the DVD drive into the case close enough to connect the cables. (Typically, there will be a data cable, a power cable and an audio cable that need to be connected.)
5、Fit the drive into the base of the enclosure and secure it to the base with the retention screws that were provided with the external enclosure kit.
6、Place the top cover on the enclosure and secure it with the screws that were provided with the enclosure.
7、Connect the drive to your system and power if required.
8、Wait for a New Hardware Found dialogue box to appear. In most installations, this will require you to insert the manufacturer-supplied CD that contains the drivers for the device into your internal CD/DVD rom drive (as the external drive is not functioning yet) and click “OK.”
9、Remove the manufacturer’s driver CD from your internal CD/DVD drive and test your external drive.
About the Author
Udtek.com delivers High Quality laptop batteries, laptop AC adapters, Laptop keyboards, Lcd chargers, DVD drivers, Scooter chargers and more. Our unique product lines of over 1000 diverse accessory power products and replacement batteries and adapters provide our customers with an extensive selection of the best quality products available.
A good amp/subs combo?
ok, i think i want to get…
1. (2) Rockford Fosgate – P1 Punch 12″ Single-Voice-Coil 4-Ohm Subwoofers
2. a Rockford Fosgate – 300W Class AB Mono Amplifier? maybe? (idk if you want to help me decide on a amp, go to my other question)
3. a Bassworx – 12″ Dual Ported Subwoofer Enclosure.
i just need to know if this is a good buy….. if i get this, it will round out to about $470 because i work at best buy so, dont suggest something that they dont have. i just want alot of kick and DEEP bass…. or as deep as i can get,with my budget.
two subs is overrated you don’t need that. just get a Vented 12 box 1 Alpine type R with a kenwood 1800 watt amp. it will sound so loud get it at Techronics.com. That sub will be half what you’ll buy it for anywhere else like crutchfield or something.
